J.C. Cuillière " Introduction à la méthode des éléments finis ", Éditions Dunod, Août 2011, ISBN 978-2100564385
J.C. Cuillière " Introduction à la méthode des éléments finis -2ème édition ", Éditions Dunod, Janvier 2016, ISBN 978-2100742622
J.C. Cuillière " Introduction à la méthode des éléments finis -2ème édition ", Éditions Dunod, Septembre 2023, ISBN 978-2100864270
CHAPITRES DE LIVRES/BOOK CHAPTERS
J.C. Cuillière, V. François, J.M. Drouet, " Automatic 3D Mesh Generation of Multiple Domains for Topology Optimization Methods", Proceedings of the 21th International Meshing Roundtable, Springer, 2012, ISBN 978-3642335730.
J.C. Cuillière, K. Souaissa, V. Francois, A. Benamara, H Hadjsalah " Automatic CAD models comparison and re-meshing in the context of mechanical design optimization ", Proceedings of the 18th International Meshing Roundtable, Springer, 2009, ISBN 978-3642043185.
S. Bournival, J.C. Cuillière, V. Francois "A mesh-geometry based approach for mixed-dimensional analysis", Proceedings of the 17th International Meshing Roundtable, Springer, 2008, ISBN 978-3540879206.
G. Foucault, J.C. Cuillière, V. Francois, J.C Léon, R. Maranzana "An extension of the advancing front method to composite geometry", Proceedings of the 16th International Meshing Roundtable, Springer, 2007, ISBN 978-3540751021.
V. Francois, J.C. Cuillière "An a priori adaptive 3D advancing front mesh generator integrated to solid modeling", Recent Advances in Integrated Design and Manufacturing in Mechanical Engineering, Kluwer Academic, Publisher, 2003, ISBN 978-1402011634.
E. Béchet, J.C. Cuillière, F. Trochu, "Génération d'un maillage pour éléments finis à partir de fichiers de stéréolithographie – Une interface indépendante des formats CAO ", De la CAO géométrique vers une CAO fonctionnelle, Hermes Science, 2003, ISBN 978-2746206533.
V. Francois, J.C. Cuillière "A set of new tools for the automatic meshing and remeshing of mechanical parts ", Integrated Design and Manufacturing in Mechanical Engineering, Kluwer Academic Publishers, 2002, ISBN 978-1402009792.
E. Béchet, E. Ruiz, J.C. Cuillière, F. Trochu, "Re-Meshing algorithms applied to resin transfer moulding simulations", CANCOM 2001 Design manufacturing and application of composites, CRC Press, 2001, ISBN 978-1587161148.
J.C. Cuillière, D. Deneux, R. Maranzana "Integrated CAD and CAPP around Feature Recognition Techniques ", Integrated Design and Manufacturing in Mechanical Engineering, Kluwer Academic Publishers, 1997, ISBN 978-0792347392.
RAPPORTS TECHNIQUES/TECHNICAL REPORTS
J.C. Cuilliere, L. Toubal, K. Bensalem, V. Francois, and P.B. Gning, " Water uptake and its effect on biocomposites", Society of Plastics Engineers (SPE Plastics Research Online), First published online: May 2015, 10.2417/spepro.005935, http://www.4spepro.org/view.php?source=005935-2015-05-06
V. François, J.C. Cuillière, "Teaching platform for mechanical engineering", 3rd update, Code_Aster ProNet , march 2016.
ARTICLES DE REVUES SCIENTIFIQUES/PAPERS
A. Meysami, S. Kelouwani, J.C. Cuillière, V. François, A. Amadou and B. Allani " An efficient indoor large map global path planning for robot navigation", Expert Systems With Applications 248 (2024) (doi:10.1016/j.eswa.2024.123388).
S.S. Karganroudi, A. Aminzadeh, H. Ibrahim, D. Rahmatabadi, V. François V, J.C. Cuillière " A novel automated approach for geometric reconstruction and flexible remanufacturing of spur gears using point cloud mapping analysis ", Computer Aided Design and Applications, vol 20 No 1 (2022) (doi: 10.14733/cadaps.2023.92-108).
A. Meysami, J.C. Cuillière, V. François, S. Kelouwani, "Investigating the Impact of Triangle and Quadrangle Mesh Representations on AGV Path Planning for Various Indoor Environments: With or without Inflation", Robotics Vol 11 No 50 (2022) (doi:https://doi.org/10.3390/robotics11020050)
A. Couture, V. François, J.C. Cuillière, P. Pilvin , "Automatic generation of statistical volume elements using multibody dynamics and an erosion-based homogenization method", Computational Mechanics (2022), (doi: 10.1007/s00466-021-02130-1)
A. Amroune, J.-C. Cuillière and V. François," Automated Lofting-BasedReconstruction of CAD Models from 3D Topology Optimization Results".Computer-Aided Design, Vol 145 (2022), (doi: https://doi.org/10.1016/j.cad.2021.103183)
A. Couture, V. François, J.C. Cuillière, P. Pilvin " Automatic Statistical Volume Element modeling based on the Unified Topology Model ", International Journal of Solids and Structures vol 191-192, pp 26-41, 2020 (doi: 10.1016/j.ijsolstr.2019.11.007)
N.H. Vu, X.T. Pham, Vincent François, Jean-Christophe Cuillière " Inverse procedure for mechanical characterization of multi-layered non-rigid composites parts with applications to the assembly process " Part C: Journal of Mechanical Engineering Science, vol 233 No17, pp 6167-6176, 2019 (doi : 10.1177/0954406219861126)
N.H. Vu, X.T. Pham, Vincent François, Jean-Christophe Cuillière "Characterization of multi-layered carbon fiber reinforced thermoplastic composites for assembly" Journal of Thermoplastic Composite Materials, Vol 32 No 5, pp 673-689, 2019 (doi: 10.1177/0892705718772878)
S.S. Karganroudi, J.C. Cuillière, V. François, S.A. Tahan, " What-if scenarios towards virtual assembly-state mounting for non-rigid parts inspection using permissible loads ", The International Journal of Advanced Manufacturing Technology, vol 97, No 1, pp 353-373, 2018 (doi: 10.1007/s00170-018-1947-4)
S.S. Karganroudi, J.C. Cuillière, V. François, S.A. Tahan, " Assessment of the robustness of a fixtureless inspection method for non-rigid parts based on a verification and validation approach", Journal of Verification, Validation and Uncertainty Quantification, vol 2, 2017 (doi: 10.1115/1.4038917).
M. Mejri, L. Toubal, J.C. Cuillière, V. Francois, " Hygrothermal aging effects on mechanical and fatigue behaviors of a short- natural-fiber-reinforced composite ", International Journal of Fatigue Vol 108, pp 96-108, 2018 (doi: 10.1016/j.ijfatigue.2017.11.004).
J.C. Cuillière, V. François, A. Nana, " Automatic Construction of Structural CAD Models from 3D Topology Optimization ", Computer Aided Design and Applications, vol 15 No 1, pp 107-121, 2018 (doi: 10.1080/16864360.2017.1353726)
A. Nana, J.C. Cuillière, V. François, " Automatic reconstruction of beam structures from 3D topology optimization results ", Computers and Structures, vol 189 pp 62-82, 2017 (doi: 10.1016/j.compstruc.2017.04.018)
V. Sabri, S. Sattarpanah, S.A. Tahan, J.C. Cuillière, V. François, X.T. Pham, " A Robust and Automated FE-Based Method for Fixtureless Dimensional Metrology of Non-Rigid Parts using an Improved Numerical Inspection Fixture ", The International Journal of Advanced Manufacturing Technology, vol 92, No 5-8, pp2411-2423, 2017 (doi 10.1007/s00170-017-0216-2).
M. Mejri, L. Toubal, J.C. Cuillière, V. Francois, " Fatigue life and residual strength of a short- natural-fiber-reinforced plastics vs nylon ", Composites Part B, Vol 110, pp 429-441, 2017 (doi: 10.1016/j.compositesb.2016.11.036).
J.C. Cuillière , V. François, " Towards Quantitative Mesh Pre-optimization for Finite Element Analysis ", Computer Aided Design and Applications, vol 14 no 4, pp 392-407, 2017 (doi: 10.1080/16864360.2016.1257183).
A. Nana, J.C. Cuillière, V. François " Towards adaptive topology optimization ", Advances in Engineering Software, vol 100, pp 290-307, 2016 (doi:10.1016/j.advengsoft.2016.08.005).
J.C. Cuillière , V. François, R. Lacroix, " A new approach to automatic and a priori mesh adaptation around circular holes for finite element analysis ", Computer Aided Design, Vol 77, pp 18-45, 2016 (doi:10.1016/j.cad.2016.03.004).
S.S. Karganroudi, J.C. Cuillière, V. François, S.A. Tahan, " Automatic fixtureless inspection of non-rigid parts based on filtering registration points", The International Journal of Advanced Manufacturing Technology, Vol 87 no 1 pp 687–712, 2016 (doi: 10.1007/s00170-016-8496-5).
L. Toubal, J.C. Cuillière, K. Bensalem, V. Francois, and P.B. Gning, " Hygrothermal effect on moisture kinetics and mechanical properties of hemp/polypropylene composite: experimental and numerical studies", Polymer Composites, vol 37 no8, pp 2342-2352, 2016 (doi:10.1002/pc.23414).
J.C. Cuillière, V.François, " Integration of CAD, FEA and Topology Optimization through a Unified Topological Model ", Computer-Aided Design and Applications, Vol 11 no 5, pp 493-508, 2014 (doi:10.1080/16864360.2014.902677).
J.C. Cuillière, V.François, J.M. Drouet, " Towards the Integration of Topology Optimization into the CAD Process ", Computer-Aided Design and Applications, Vol 11 no2, pp 120-140, 2014 (doi:10.1080/16864360.2014.846067).
J.C. Cuillière , V. François, J.M Drouet, " Automatic mesh generation and transformation for topology optimization methods ", Computer Aided Design, Vol 45, pp 1489-1506, 2013 (doi: 10.1016/j.cad.2013.07.004).
G. Foucault, J.C. Cuillière , V. François, J.C Léon, R. Maranzana, " Generalizing the advancing front method to composite surfaces in the context of Meshing Constraints Topology ", Computer Aided Design, Vol 45, pp 1408-1425, 2013 (doi: 10.1016/j.cad.2013.05.009).
J.C. Cuillière , S. Bournival, V. François, " Contribution à l'automatisation des analyses par éléments finis multidimensionnelles - Towards the automation of mixed-dimensional finite element analysis ", Mécanique et Industries, Vol 12 pp 513–531, 2011 (doi:10.1051/meca/2011146).
J.C. Cuillière, V. Francois, K. Souaissa, A. Benamara, H Hadjsalah " Automatic comparison and remeshing applied to CAD model modification ", Computer Aided Design, Vol 43, pp 1545-1560, 2011 (doi:10.1016/j.cad.2011.08.007)
K. Souaissa, J.C. Cuillière, V. Francois, A. Benamara, H Hadjsalah " Automatic modification retrieval between CAD parts ", Mécanique et Industries, Vol 11 pp 85–92, 2010 (doi: 10.1051/meca/2010020).
J.C. Cuillière , S. Bournival, V. François, "A mesh-geometry-based solution to mixed-dimensional coupling", Computer Aided Design Vol 42, pp 509-522, 2010 (doi:10.1016/j.cad.2010.01.007)
S. Bournival, J.C. Cuillière ,V. François, "A mesh-geometry based method for coupling 1D and 3D elements", Advances in Engineering Software Vol 41, pp 838-858, 2010 (doi:10.1016/j.advengsoft.2010.02.004)
V. Francois, J.C. Cuillière, "A Unified Topological Model (UTM) for Integrated Analysis", Revue d'Ingénierie Numérique Collaborative, Vol 1, No 4, 2009.
S. Bournival, J.C. Cuillière, V. Francois " Méthode de couplage automatique d'éléments finis 1D, 2D et 3D pour l'analyse multidimensionnelle", Revue d'Ingénierie Numérique Collaborative, Vol 1, No 3, 2009.
G. Foucault, J.C. Cuillière , V. François, J.C Léon, R. Maranzana, "Adaptation of CAD model topology for Finite Element Analysis ", Computer Aided Design Vol 40, No 2, pp 176-196, Feb 2008 (doi:10.1016/j.cad.2007.10.009)
E. Béchet, E. Ruiz, J.C. Cuillière, F. Trochu, "Re-meshing algorithms applied to resin transfer moulding simulations", Journal or Reinforced Plastics and Composites, Vol 23, Jan 2004, pp17-36.
E Béchet, E Ruiz, F Trochu, J-C Cuillière "Adaptive mesh generation for mould filling problems in resin transfer moulding", Composites : Part A, Vol 34 (2003), pp 813-834.
E. Béchet, J.C. Cuillière, F. Trochu, "Génération d'un maillage pour éléments finis à partir de fichiers de stéréolithographie – Une interface indépendante des formats CAO ", Numéro spécial de la revue Internationale de CFAO et d'Informatique Graphique, Vol 17, No 1-2, 2002 (ouvrage collectif publié sous le titre : De la CAO géométrique vers une CAO fonctionnelle).
E. Béchet, J.C. Cuillière, F. Trochu, "Generation of a Finite Element Mesh from Stereolithography (STL) Files", Computer Aided design, Vol 34 No 1, pp 1-17, Jan 2002.
V. Francois, J.C. Cuillière, "3D Automatic Remeshing Applied to Model Modification", Computer Aided Design, Vol 32, Juin 2000, pp 433-444.
J.C. Cuillière, R. Maranzana "Automatic and a priori refinement of three-dimensional meshes based on feature recognition techniques", Advances in Engineering software, Vol 30, 1999, pp 563-573
V. Francois, J.C. Cuillière, "Automatic mesh pre-optimization based on the geometric discretization error", Advances in Engineering Software, Vol 31, Aout 2000, pp 763-774 .
V. Francois, J.C. Cuillière, M. Gueury "Méthodes de remaillage automatique appliquées à la modification de modèle", Revue Européenne des Éléments Finis, Vol 8, No 4, Juillet 1999, pp 433-454.
V. Francois, J.C. Cuillière, M. Gueury "Automatic mesh generation and regeneration in the simultaneous engineering context ", Research in Engineering Design, Vol 11, 1999, pp 55-66.
J.C. Cuillière "An adaptive method for the automatic triangulation of 3D parametric surfaces", Computer Aided Design, Vol 30, No 2, pp 139-149, 1998.
J.C. Cuillière "A direct method for the automatic discretization of 3D parametric curves", Computer Aided Design, Vol 29, Sept 1997, pp. 639-647
V. Francois, J.C. Cuillière, M. Gueury "Méthodes de remaillage automatique dans le contexte de l'ingénierie simultanée ", Revue Internationale de CFAO et d'Informatique Graphique, Vol 12, No 5, Oct 1997, pp 531-552.
J.C. Cuillière, R. Maranzana, M. Gueury, "Intégration à un modèle géométrique dual du maillage de domaines tridimensionnels appliqué aux méthodes numériques", Revue Européenne des éléments finis, Vol 5 No 2 pp 143-161 (1996).
D. Koffi, J.C. Cuillière, "Étude des régimes et des paramètres de lubrification des engrenages en matériaux thermoplastiques", Revue matériaux et Techniques, Paris
J-F, Zimmermann, B. Masson, S. Dufour and J-C. Cuillière, "Modelling of the thermal cycles in a steel plate during welding", J. of Mater., 1999, 19, (4,5 et 6) pages 73-88.