[142] S Echchakoui, JP Dion, N Barka, and SS Karganroudi. Maintenance excellence and cmms criteria choice in the context of small hospital and healthcare organisations. International Journal of Logistics Systems and Management, 47(2):210--245, 2024.
[141] A Aminzadeh, S Sattarpanah Karganroudi, and J Goldak. Insight into the key process parameters on residual stress distribution in deep drawing of laser-welded blanks: Response surface modeling. Journal of Materials Engineering and Performance, 33(8):4136--4148, 2024.
[140] J Chen, Y Wen, X Sun, A Zeb, MS Meiabadi, and SS Karganroudi. Fpca-setcn: A novel deep learning framework for remaining useful life prediction. IEEE Sensors Journal, 2024.
[139] A Mansoura, S Dehghan, N Barka, and SS Kangranroudi. Investigation into the effect of process parameters on density, surface roughness, and mechanical properties of 316l stainless steel fabricated by selective laser melting. The International Journal of Advanced Manufacturing Technology 130 (5), 2547 …, 2024.
[138] A Mansoura, S Dehghan, N Barka, S Sattarpanah Karganroudi, and M Houria. Effect of heat treatment parameters on microstructure and microhardness of 15-5ph stainless steel fabricated by selective laser melting. Journal of the Brazilian Society of Mechanical Sciences and Engineering 46 …, 2024.
[137] A Mansoura, N Omidi, N Barka, SS Karganroudi, and S Dehghan. Selective laser melting of stainless steels: a review of process, microstructure and properties. Metals and Materials International, pages 1--29, 2024.
[136] P Rizk, F Rizk, SS Karganroudi, A Ilinca, R Younes, and J Khoder. Advanced wind turbine blade inspection with hyperspectral imaging and 3d convolutional neural networks for damage detection. Energy and AI, 16:100366--100366, 2024.
[135] MA Rahman, H Taheri, F Dababneh, SS Karganroudi, and S Arhamnamazi. A review of distributed acoustic sensing applications for railroad condition monitoring. Mechanical Systems and Signal Processing, 208:110983--110983, 2024.
[134] SS Karganroudi, V François, and JC Cuillière. Fixtureless geometric inspection of slightly deformed non-rigid structures leveraging assembly load techniques. 16ème Colloque National en Calcul de Structures, 2024.
[133] G Afshar, A Couture, V François, JC Cuillière, and É Bourdier. Modélisation de la microstructure de composites particulaires à haute teneur en fibres. 16ème Colloque National en Calcul de Structures, 2024.
[132] A Meysami, S Kelouwani, JC Cuilliere, V Francois, A Amamou, and B Allani. An efficient indoor large map global path planning for robot navigation. Expert Systems with Applications, 248:123388--123388, 2024.
[131] I Houban, A Aminzadeh, S Sattarpanah Karganroudi, and N Barka. Smart inspection; conceptual framework, industrial scenarios, and sustainability perspectives. Sustainable Manufacturing in Industry 4.0: Pathways and Practices, pages 125--142, 2023.
[130] A Hadjadji, S Sattarpanah Karganroudi, N Barka, and S Echchakoui. Advances in smart maintenance for sustainable manufacturing in industry 4.0. Sustainable Manufacturing in Industry 4.0: Pathways and Practices, pages 97--123, 2023.
[129] A Barfeh, R Hashemi, R Safdarian, D Rahmatabadi, A Aminzadeh, and ... Predicting the forming limit diagram of the fine-grained aa 1050 sheet using gtn damage model with experimental verifications. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of …, 2023.
[128] A Aminzadeh, M Dimitrova, MS Meiabadi, S Sattarpanah Karganroudi, and ... Non-contact inspection methods for wind turbine blade maintenance: Techno–economic review of techniques for integration with industry 4.0. Journal of Nondestructive Evaluation, 42(2):54--54, 2023.
[127] M Achouch, M Dimitrova, R Dhouib, H Ibrahim, M Adda, and ... Predictive maintenance and fault monitoring enabled by machine learning: experimental analysis of a ta-48 multistage centrifugal plant compressor. Applied Sciences, 13(3):1790--1790, 2023.
[126] M Lizotte, JB Piaud, R Panneton, TC Kone, JC Cuilliere, and V François. Aeroacoustic optimization of a metacage to block the noise emitted by an exhaust fan. Canadian Acoustics, 51(3):138--139, 2023.
[125] A Aminzadeh, H Ibrahim, M Adda, and H Taheri. On smart geometric non-destructive evaluation: Inspec-tion methods, overview, and chal-lenges. materials 2022, 15, 7187. s Note: MDPI stays neu-tral with regard to jurisdictional claims in …, 2022.
[124] S Sattarpanah Karganroudi, A Aminzadeh, VBF Kemda, and N Barka. 3d hardness profile mapping and geometrical defect prediction of laser-welded galvanized steel blanks using wobbling technology: an experimental investigation. The International Journal of Advanced Manufacturing Technology 120 (3), 2229 …, 2022.
[123] K Ba, S Sattarpanah Karganroudi, A Aminzadeh, M Javidani, and ... An innovative approach to improving residual stress distribution and metallurgical refinement of forged aa7175 applied in the aeronautical industry. Applied Mechanics, 3(4):1327--1336, 2022.
[122] SS Karganroudi, A Aminzadeh, VBF Kemda, and N Barka. 3d hardness profile mapping and geometrical defect prediction of laser-welded galvanized steel blanks using wobbling technology: an experimental investigation. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 120 (3-4), pages 2229--2246, 2022.
[121] K Bensalem, N Barka, S Sattarpanah Karganroudi, A Sadeghian, and ... Effects of laser process parameters on the hardness profile of aisi 4340 cylindrical samples: statistical and experimental analyses. The International Journal of Advanced Manufacturing Technology 122 (7), 2849 …, 2022.
[120] A Aminzadeh, N Nasiri, N Barka, A Parvizi, K Abrinia, M Moradi, and ... Statistical analysis of laser-welded blanks in deep drawing process: response surface modeling. Journal of Materials Engineering and Performance, pages 1--17, 2022.
[119] A Fayad, H Ibrahim, A Ilinca, S Sattarpanah Karganroudi, and M Issa. Energy efficiency improvement of diesel–electric trains using solar energy: A feasibility study. Applied Sciences, 12(12):5869--5869, 2022.
[118] SS Karganroudi, RE Silva, YC El Ouazani, A Aminzadeh, M Dimitrova, and ... A novel assembly process guidance using augmented reality for a standalone hybrid energy system. The International Journal of Advanced Manufacturing Technology 122 (7-8 …, 2022.
[117] S Sattarpanah Karganroudi, RE Silva, Y Chahdi El Ouazani, and ... A novel assembly process guidance using augmented reality for a standalone hybrid energy system. The International Journal of Advanced Manufacturing Technology 122 (7), 3425 …, 2022.
[116] A Jaber, S Sattarpanah Karganroudi, MS Meiabadi, A Aminzadeh, and ... On smart geometric non-destructive evaluation: inspection methods, overview, and challenges. Materials, 15(20):7187--7187, 2022.
[115] Y Echerfaoui, A El Ouafi, and S Sattarpanah Karganroudi. Dynamic errors compensation of high-speed coordinate measuring machines using ann-based predictive modeling. The International Journal of Advanced Manufacturing Technology 122 (5), 2745 …, 2022.
[114] A Hashemi, H Gholami, U Venkatadri, S Sattarpanah Karganroudi, and ... A new direct coefficient-based heuristic algorithm for set covering problems. International Journal of Fuzzy Systems, pages 1--17, 2022.
[113] YC Niranjan, SG Channabasavanna, S Krishnapillai, R Velmurugan, and ... The unprecedented role of 3d printing technology in fighting the covid-19 pandemic: a comprehensive review. Materials, 15(19):6827--6827, 2022.
[112] M Dimitrova, A Aminzadeh, MS Meiabadi, S Sattarpanah Karganroudi, and ... A survey on non-destructive smart inspection of wind turbine blades based on industry 4.0 strategy. Applied Mechanics, 3(4):1299--1326, 2022.
[111] DG Mohan, J Tomków, and SS Karganroudi. Laser welding of uns s33207 hyper-duplex stainless steel to 6061 aluminum alloy using high entropy alloy as a filler material. Appl. Sci, 12:2849--2849, 2022.
[110] A Aminzadeh, S Sattarpanah Karganroudi, MS Meiabadi, DG Mohan, and ... A survey of process monitoring using computer-aided inspection in laser-welded blanks of light metals based on the digital twins concept. Quantum Beam Science, 6(2):19--19, 2022.
[109] M Achouch, M Dimitrova, K Ziane, S Sattarpanah Karganroudi, R Dhouib, and ... On predictive maintenance in industry 4.0: Overview, models, and challenges. Applied Sciences, 12(16):8081--8081, 2022.
[108] A Amroune, V François, and JC Cuillière. Reconstruction automatique de modèle cao de type poutre optimisé topologiquement. 15ème colloque national en calcul des structures, 2022.
[107] A Couture, V François, JC Cuillière, and P Pilvin. Automatic generation of statistical volume elements using multibody dynamics and an erosion-based homogenization method. Computational Mechanics, 69(4):1041--1066, 2022.
[106] A Meysami, JC Cuillière, V François, and S Kelouwani. Investigating the impact of triangle and quadrangle mesh representations on agv path planning for various indoor environments: With or without inflation. Robotics, 11(2):50--50, 2022.
[105] A Amroune, JC Cuillière, and V François. Automated lofting-based reconstruction of cad models from 3d topology optimization results. Computer-Aided Design, 145:103183--103183, 2022.
[104] S Sattarpanah Karganroudi, M Moradi, M Aghaee Attar, SA Rasouli, and ... Experimental and numerical analysis on tig arc welding of stainless steel using rsm approach. Metals, 11(10):1659--1659, 2021.
[103] S Sattarpanah Karganroudi, BH Nasab, D Rahmatabadi, M Ahmadi, and ... Anisotropic behavior of al1050 through accumulative roll bonding. Materials (Basel, Switzerland), 14(22), 2021.
[102] M Parvinzadeh, S Sattarpanah Karganroudi, N Omidi, N Barka, and M Khalifa. A novel investigation into the edge effect reduction of 4340 steel disc through induction hardening process using magnetic flux concentrators. The International Journal of Advanced Manufacturing Technology 115 (9), 2959 …, 2021.
[101] S Sattarpanah Karganroudi, S Shojaei, R Hashemi, D Rahmatabadi, and ... Insight into the influence of punch velocity and thickness on forming limit diagrams of aa 6061 sheets—numerical and experimental analyses. Metals, 11(12):2010--2010, 2021.
[100] A Aminzadeh, S Sattarpanah Karganroudi, and N Barka. Experimental and numerical investigation of forming defects and stress analysis in laser-welded blanks during deep drawing process. The International Journal of Advanced Manufacturing Technology, 117:1193--1207, 2021.
[99] M Parvinzadeh, S Sattarpanah Karganroudi, N Omidi, N Barka, and M Khalifa. A novel investigation into edge effect reduction of 4340 steel spur gear during induction hardening process. The International Journal of Advanced Manufacturing Technology, 113:605--619, 2021.
[98] K Ba, J Levesque, A Gakwaya, and SS Karganroudi. Residual stress investigation of quenched and artificially aged aluminum alloy 7175. The International Journal of Advanced Manufacturing Technology 116 (5), 1537 …, 2021.
[97] A Fayad, H Ibrahim, A Ilinca, S Sattarpanah Karganroudi, and M Issa. Energy recovering using regenerative braking in diesel–electric passenger trains: Economical and technical analysis of fuel savings and ghg emission reductions. Energies, 15(1):37--37, 2021.
[96] A Omrani, S Langlois, P Van Dyke, S Lalonde, and ... Fretting fatigue life assessment of overhead conductors using a clamp/conductor numerical model and biaxial fretting fatigue tests on individual wires. Fatigue &Fracture of Engineering Materials &Structures, 2021.
[95] K Ziane, A Ilinca, SS Karganroudi, and M Dimitrova. Neural network optimization algorithms to predict wind turbine blade fatigue life under variable hygrothermal conditions. Eng, 2(3):278--295, 2021.
[94] A Aminzadeh, SS Karganroudi, and N Barka. A novel approach of residual stress prediction in st-14/st-44 laser welded blanks; mechanical characterization and experimental validation. Materials Letters, 285:129193--129193, 2021.
[93] SS Karganroudi, M Moradi, MA Attar, SA Rasouli, M Ghoreishi, and ... Experimental and numerical analysis on tig arc welding of stainless steel using rsm approach. Metals, 11(10):1659--1659, 2021.
[92] A Aminzadeh, SS Karganroudi, N Barka, and A El Ouafi. A real-time 3d scanning of aluminum 5052-h32 laser welded blanks; geometrical and welding characterization. Materials Letters, 296:129883--129883, 2021.
[91] H Gholami, F Abu, JKY Lee, SS Karganroudi, and S Sharif. Sustainable manufacturing 4.0—pathways and practices. Sustainability, 13(24):13956--13956, 2021.
[90] SS Karganroudi, VBF Kemda, and N Barka. A novel method of identifying porosity during laser welding of galvanized steels using microhardness pattern matrix. Manufacturing Letters, 25:98--101, 2020.
[89] N Barka, S Sattarpanah Karganroudi, R Fakir, P Thibeault, and ... Effects of laser hardening process parameters on hardness profile of 4340 steel spline—an experimental approach. Coatings, 10(4):342--342, 2020.
[88] E Béchet, E Ruiz, F Trochu, and JC CuillÈRe. Re-meshing algorithms applied to resin transfer moulding simulations. CANCOM 2001 Proceedings of the 3rd Canadian International Conference on …, 2020.
[87] A Couture, V François, JC Cuillière, and P Pilvin. Automatic statistical volume element modeling based on the unified topology model. International Journal of Solids and Structures, 191:26--41, 2020.
[86] A Omrani, S Langlois, P Van Dyke, SS Karganroudi, and S Lalonde. Fatigue strength evaluation for individual strands of overhead conductors using a biaxial fretting fatigue test bench. MATEC Web of Conferences, 300:6003--6003, 2019.
[85] NH Vu, XT Pham, V François, and JC Cuillière. Caractérisation du comportement d’une plaque composite de grande dimension. Substance ÉTS, 2019.
[84] NH Vu, XT Pham, V François, and JC Cuillière. Behavior characterization of large dimension composite plate. Substance ÉTS, 2019.
[83] NH Vu, XT Pham, V François, and JC Cuillière. Inverse procedure for mechanical characterization of multi-layered non-rigid composite parts with applications to the assembly process. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of …, 2019.
[82] NH Vu, XT Pham, V François, and JC Cuillière. Characterization of multilayered carbon-fiber–reinforced thermoplastic composites for assembly process. Journal of Thermoplastic Composite Materials, 32(5):673--689, 2019.
[81] S Sattarpanah Karganroudi, JC Cuillière, V François, and SA Tahan. “what-if” scenarios towards virtual assembly-state mounting for non-rigid parts inspection using permissible loads. The International Journal of Advanced Manufacturing Technology, 97:353--373, 2018.
[80] JC Cuillière, V François, and A Nana. Automatic construction of structural cad models from 3d topology optimization. Computer-Aided Design and Applications, 15(1):107--121, 2018.
[79] M Mejri, L Toubal, JC Cuillière, and V François. Hygrothermal aging effects on mechanical and fatigue behaviors of a short-natural-fiber-reinforced composite. International Journal of Fatigue, 108:96--108, 2018.
[78] S Sattarpanah Karganroudi. Contribution à l'inspection automatique des pièces flexibles à l'état libre sans gabarit de conformation. Université du Québec à Trois-Rivières, 2017.
[77] V Sabri. Dimensional metrology of non-rigid parts without specialized inspection fixtures. École de technologie supérieure, 2017.
[76] V François, JC Cuillière, and A Nana. Reconstruction automatique et validation de structures 3d optimisées topologiquement. 13e colloque national en calcul des structures, 2017.
[75] A Couture, V François, JC Cuillière, and P Pilvin. Modélisation de la microstructure de composites particulaires: Application à l'homogénéisation en conduction thermique. 13e colloque national en calcul des structures, 2017.
[74] JC Cuillière and V Francois. Towards quantitative mesh pre-optimization for finite element analysis. Computer-Aided Design and Applications, 14(4):392--407, 2017.
[73] SS Karganroudi, JC Cuillière, V François, and SA Tahan. Assessment of the robustness of a fixtureless inspection method for nonrigid parts based on a verification and validation approach. Journal of Verification, Validation and Uncertainty Quantification, 2(4):41002--41002, 2017.
[72] V Sabri, S Sattarpanah, SA Tahan, JC Cuillière, V François, and XT Pham. A robust and automated fe-based method for fixtureless dimensional metrology of non-rigid parts using an improved numerical inspection fixture. The International Journal of Advanced Manufacturing Technology, 92:2411--2423, 2017.
[71] A Nana, JC Cuillière, and V Francois. Automatic reconstruction of beam structures from 3d topology optimization results. Computers &Structures, 189:62--82, 2017.
[70] M Mejri, L Toubal, JC Cuillière, and V François. Fatigue life and residual strength of a short-natural-fiber-reinforced plastic vs nylon. Composites Part B: Engineering, 110:429--441, 2017.
[69] JC Cuillière, V François, and R Lacroix. A new approach to automatic and a priori mesh adaptation around circular holes for finite element analysis. Computer-Aided Design, 77:18--45, 2016.
[68] S Sattarpanah Karganroudi, JC Cuillière, V Francois, and SA Tahan. Automatic fixtureless inspection of non-rigid parts based on filtering registration points. The International Journal of Advanced Manufacturing Technology, 87:687--712, 2016.
[67] L Toubal, JC Cuillière, K Bensalem, V Francois, and PB Gning. Hygrothermal effect on moisture kinetics and mechanical properties of hemp/polypropylene composite: Experimental and numerical studies. Polymer Composites, 37(8):2342--2352, 2016.
[66] A Nana, JC Cuillière, and V Francois. Towards adaptive topology optimization. Advances in Engineering Software, 100:290--307, 2016.
[65] J Gervais Lavoie. Intégration de la méthode du mouvement normal au processus de cao pour l'optimisation de cadres de vélos. Université du Québec à Trois-Rivières, 2015.
[64] V François, JC Cuillière, and A Nana. Optimisation de topologie adaptative. 12e colloque national en calcul des structures, 2015.
[63] V François and JC Cuillière. Magic un framework orienté objet pour implémenter le modèle de topologie unifiée. 12e Colloque national en calcul des structures, 2015.
[62] SS Karganroudi, JC Cuillière, V Francois, and SA Tahan. An improvement of fixtureless inspection for non-rigid parts based on filtering sample points. Proceedings of the 25th Canadian Congress of Applied Mechanics (CANCAM 2015), 2015.
[61] JC Cuilliere, L Toubal, K Bensalem, V François, and PB Gning. Water uptake and its effect on biocomposites. SPE PRO, 2015.
[60] JC Cuillière, V Francois, and JM Drouet. Towards the integration of topology optimization into the cad process. Computer-Aided Design and Applications, 11(2):120--140, 2014.
[59] JC Cuillière and V Francois. Integration of cad, fea and topology optimization through a unified topological model. Computer-aided design and applications, 11(5):493--508, 2014.
[58] V François, E Béchet, and JC Cuillière. Intégration de la méthode xfem dans le processus de cao. 11e colloque national en calcul des structures, 2013.
[57] K Bensalem, L Toubal, JC Cuillière, V François, and PB Gning. Experimental and numerical studies study of hygrothermal aging of a short hemp fibers/polypropylene composite. The 19th international conference on composite materials, 2013.
[56] K Bensalem, L Toubal, JC Cuillière, V François, and PB Gning. Experimental and numerical study of hygrothermal aging of a short hemp fibers/polypropylene composite. 19th International conference on composite materials, 2013.
[55] JC Cuillière, V Francois, and JM Drouet. Automatic 3d mesh generation of multiple domains for topology optimization methods. Proceedings of the 21st International Meshing Roundtable, pages 243--259, 2013.
[54] JC Cuillière, V Francois, and JM Drouet. Automatic mesh generation and transformation for topology optimization methods. Computer-Aided Design, 45(12):1489--1506, 2013.
[53] G Foucault, JC Cuillière, V François, JC Léon, and R Maranzana. Generalizing the advancing front method to composite surfaces in the context of meshing constraints topology. Computer-Aided Design, 45(11):1408--1425, 2013.
[52] SS Karganroudi, MR Roshani, MR Aligoodarz, and MRS Tehrani. Estimating the position and size of a cavity in a plate by means of boundary element method and conduction heat transfer. ASME International Mechanical Engineering Congress and Exposition, 45257:903--909, 2012.
[51] JC Cuilliere, S Bournival, and V Fracois. Towards the automation of mixed-dimensional finite-element analysis. MECANIQUE &INDUSTRIES, 12(6):513--531, 2011.
[50] JC Cuillière. Introduction à la méthode des éléments finis: Cours et exercices corrigés. Hachette, 2011.
[49] JC Cuillière, S Bournival, and V François. Contribution à l’automatisation des analyses par éléments-finis multidimensionnelles. Mechanics &Industry, 12(6):513--531, 2011.
[48] JC Cuillière, V François, K Souaissa, A Benamara, and H BelHadjSalah. Automatic comparison and remeshing applied to cad model modification. Computer-Aided Design, 43(12):1545--1560, 2011.
[47] K Souaissa, JC Cuillière, V François, A Benamara, and H BelHadjSalah. Automatic modification retrieval between cad parts. Mechanics &Industry, 11(2):85--92, 2010.
[46] B Louhichi, N Aifaoui, M Hamdi, A BenAmara, and V Francois. An optimization-based computational method for surface fitting to update the geometric information of an existing b-rep cad model. International Journal of CAD/CAM, 9(1):17--24, 2010.
[45] JC Cuillière, S Bournival, and V François. A mesh-geometry-based solution to mixed-dimensional coupling. Computer-aided design, 42(6):509--522, 2010.
[44] S Bournival, JC Cuillière, and V François. A mesh-geometry based method for coupling 1d and 3d elements. Advances in Engineering Software, 41(6):838--858, 2010.
[43] E Béchet, N Moës, B Wolhmuth, M Moumnassi, and V François. Simulations in ambient space: freeing mesh generation techniques from the respect of boundaries in the context of the fem. 11th ISGG Conference, 2009.
[42] B Louhichi, A BenAmara, and V François. Reconstruction automatique des entités d’un modèle brep à partir d’un maillage déformé. European Journal of Computational Mechanics/Revue Européenne de Mécanique …, 2009.
[41] M Moumnassi, É Béchet, S Belouettar, V François, D Quoirin, and ... Calculs de structures basés sur la technique des level sets et la méthode de partition de l'unité. 9e Colloque national en calcul des structures, 2009.
[40] G Foucault, JC Léon, R Maranzana, JC Cuillière, and V François. Adaptation de la topologie cao pour la génération d'un modèle de simulation et de ses contraintes de maillage éléments finis. 9e Colloque national en calcul des structures, 2009.
[39] K Souaissa, A Benamara, H Belhadjsalah, and V François. Détection et remaillage automatique appliqué aux modèles cao modifiés. CFM 2009-19ème Congrès Français de Mécanique, 2009.
[38] B Louhichi, M Tlija, A BenAmara, and V Francois. Rebuilding of cad model from deformed mesh important displacement case. MECANIQUE ET INDUSTRIES, 10(6):477--486, 2009.
[37] B Louhichi, A Benamara, and V François. Automatic reconstruction of cad model from a deformaed mesh. European Journal of Computational Mechanics 18 (3-4), pages 177--194, 2009.
[36] B Louhichi, M Tlija, A BenAmara, and V François. Reconstruction d’un modèle cao à partir d’un maillagedéformé: Application dans le cas de grands déplacements. Mechanics &Industry, 10(6):477--486, 2009.
[35] JC Cuillière, V François, K Souaissa, A Benamara, and H BelHadjSalah. Automatic cad models comparison and re-meshing in the context of mechanical design optimization. Proceedings of the 18th International Meshing Roundtable, pages 231--245, 2009.
[34] B Louhichi. Intégration cao/calcul par reconstruction du modèle cao à partir des résultats éléments finis. Université du Centre, 2008.
[33] S Bournival, JC Cuillière, and V François. A mesh-geometry based approach for mixed-dimensional analysis. Proceedings of the 17th International Meshing Roundtable, pages 299--313, 2008.
[32] G Foucault, JC Cuillière, V Francois, JC Léon, and R Maranzana. An extension of the advancing front method to composite geometry. Proceedings of the 16th international meshing roundtable, pages 287--314, 2008.
[31] G Foucault, JC Cuillière, V François, JC Léon, and R Maranzana. Adaptation of cad model topology for finite element analysis. Computer-Aided Design, 40(2):176--196, 2008.
[30] G Foucault, JC Léon, JC Cuillière, V François, and R Maranzana. Vers l'adaptation automatisée des modèles cao pour la simulation par éléments finis. 10ème colloque AIP-PRIMECA, pages 1--12, 2007.
[29] V François and JC Cuillière. Calcul de carte de taille automatique pour la pré-optimisation de maillages dans le cadre de l'intégration cao-Éléments finis. 8e Colloque national en calcul des structures, 2007.
[28] JC Léon, G Foucault, JC Cuillière, V François, and R Maranzana. An extension of the advancing front method to composite geometry. 16th International Meshing Roundtable, CD Rom, 2007.
[27] G Foucault, JC Cuillière, V François, JC Léon, and R Maranzana. Towards cad models automatic simplification for finite element analysis. CMS, 7:1--8, 2007.
[26] G Foucault, JC Leon, JC Cuilliere, V François, and R Maranzana. A topological model for the representation of meshing constraints in the context of finite element analysis. International Design Engineering Technical Conferences and Computers and …, 2006.
[25] B LOUHICHI, A BENAMARA, and V FRANCOIS. Intégration cao/calcul par reconstruction des modèles cao à partir des résultats de calcul: Application à la simulation de la cinématique d'un assemblage. Revue internationale d'ingénierie numérique, 1(1):9--26, 2005.
[24] E Béchet, E Ruiz, F Trochu, and JC Cuilliere. Re-meshing algorithms applied to mould filling simulations in resin transfer moulding. Journal of reinforced plastics and composites, 23(1):17--36, 2004.
[23] V Francois and JC Cuillière. An a priori adaptive 3d advancing front mesh generator integrated to solid modeling. Recent advances in integrated design and manufacturing in mechanical …, 2003.
[22] F Trochu, E Béchet, and JC Cuillière. Maillage adaptatif appliqué au suivi d'un front d'écoulement et application à la fabrication des composites par injection. 58e Colloque des Sciences Mathématiques du Québec, 2002.
[21] E Béchet, JC Cuillière, and F Trochu. Génération d'un maillage pour éléments finis à partir de fichiers stéréolithographie (stl): une interface indépendante des formats de cao. Revue internationale de CFAO et d'informatique graphique, 17, 2002.
[20] E Béchet, JC Cuilliere, and F Trochu. Generation of a finite element mesh from stereolithography (stl) files. Computer-Aided Design, 34(1):1--17, 2002.
[19] JC Cuilliere and V François. A set of new tools for the automatic meshing and remeshing of mechanical parts. Integrated Design and Manufacturing in Mechanical Engineering: Proceedings …, 2002.
[18] V FRANÇOIS. Jean-christophe cuilliere. Integrated Design and Manufacturing in Mechanical Engineering: Proceedings …, 2002.
[17] E Béchet, JC Cuillière, and F Trochu. Génération de maillages anisotropes à partir de fichiers stéréolithographie. Congrès ACFAS, 2001.
[16] E Béchet, JC Cuillère, and F Trochu. Generation of a fem mesh from stereolithography (stl) files. 7th International conference on Numerical Grid Generation in Computational …, 2000.
[15] V François and JC Cuillière. Automatic mesh pre-optimization based on the geometric discretization error. Advances in Engineering Software, 31(10):763--774, 2000.
[14] V François and JC Cuilliere. 3d automatic remeshing applied to model modification. Computer-Aided Design, 32(7):433--444, 2000.
[13] E Béchet, JC Cuillière, JF Remacle, and F Trochu. Transformation d'un maillage stl pour les méthodes numériques. Journée Maillage, CERCA, 1999.
[12] JC Cuilliere and R Maranzana. Automatic and a priori refinement of three-dimensional meshes based on feature recognition techniques. Advances in Engineering software, 30(8):563--573, 1999.
[11] V François, JC Cuilliere, and M Gueury. Méthodes de remaillage automatique appliquées à la modification de modèle. Revue Européenne des éléments finis, 8(4):433--454, 1999.
[10] V Francois, JC Cuilliere, and M Gueury. Automatic meshing and remeshing in the simultaneous engineering context. Research in Engineering Design, 11:55--66, 1999.
[9] JC Cuillière. An adaptive method for the automatic triangulation of 3d parametric surfaces. Computer-aided design, 30(2):139--149, 1998.
[8] V Francois. Automatic meshing and remeshing methods applied to model modification in the simultaneous engineering context (paper in french). PhD. Thesis. University Henri POINCARE, Nancy I (France). November, 1998, 1998.
[7] V François. Méthodes de maillage et de remaillage automatiques appliquées à la modification de modèle dans le contexte de l'ingénierie simultanée. Université Henri Poincaré-Nancy, 1, 1998.
[6] B Masso and JC Cuillière. Simulation of the thermal cycles in a steel plate during arc welding: A microcomputer program modeling in 3d the thermal behaviour of a steel plate during butt welding …. The Journal of Materials Education, 19, 1997.
[5] JC Cuillière, D Deneux, and R Maranzana. Integrated cad and capp around feature recognition techniques. Integrated Design and Manufacturing in Mechanical Engineering: Proceedings …, 1997.
[4] JC Cuillière. A direct method for the automatic discretization of 3d parametric curves. Computer-Aided Design, 29(9):639--647, 1997.
[3] V Francois, JC CUILLIERE, and M Gueury. Méthodes de remaillage automatique appliquées à la modification de modèles. Revue internationale de CFAO et d'informatique graphique, 12(5):531--552, 1997.
[2] JC Cuillière, R Maranzana, and M Gueury. Intégration géométrie-maillage appliquée aux méthodes numériques. Revue Européenne des Éléments Finis, 5(2):143--160, 1996.
[1] JC Cuillière. Pré-optimisation de maillages automatiques tridimensionnels pour les méthodes numériques: application à l'ingénierie simultanée. Institut National Polytechnique de Lorraine, 1993.

This file was generated by bibtex2html 1.99.